THIS IS THE ESSENTIAL AFTERMARKET PART!!!
Each Rad Guard comes with its own easy to read fitting instructions. The Rad Guard is bolted onto existing mounting points. There is NO cutting or alterations needed to fit this Rad Guard.
Aircraft grade 6060 T1-T5 aluminium is used to manufacture our Expanded Mesh & Frames.
The rigid frame of the Rad Guard holds the expanded mesh in place so that hard hits by stones and any other road debris will save your core from certain damage. This rigid frame also acts as a brace to prevent the radiator core from being squashed if a side impact occurs. For example, the bike falls off the stand.
The Expanded Mesh has proven to be the perfect choice of material. It is lightweight and very strong. It does NOT restrict air flow.
The Expanded Mesh sits off your radiator core by approximately 10-15mm, so even a direct hit from a stone, bird or any other road debris will save your radiator core from being damaged.
All Rad Guards come with rubber backing were necessary to alleviate any rubbing or vibration. This has already been installed on the guard.
All Rad Guards come with a 3 Year Transferable Warranty.
Protect your radiator and order your Rad Guard today.
NOTE....If you have fitted the Crash Bar, Chris from Berkshire in the UK has suggested this handy hint.
To get around the problem of the engine bar (and removing them would mean releasing multiple bolts), removed the radiator top bolt (brake lever side) and gently lift the radiator to allow the bottom fixing of the Rad Guard to slip over the crosspiece of the engine bar. Fiddly, but does the trick.